This feature was deprecated in version 2.6. Since then we have been using Github for version control.. 9
See also: History of WeBWorK version control
WeBWorK uses the Subversion version control system. Subversion's command-line interface is similar to CVS, and was developed to both improve upon CVS but to also be very easy for CVS users to learn. All WeBWorK installations should be transferred from CVS to SVN. Instructions for doing so can be found in Converting a CVS checkout to SVN.
This article gives a brief introduction to Subversion, how to use it to download (or checkout) the WeBWorK code, and how to keep your downloaded code (your working copy) up to date. If you are a WeBWorK developer or plan to start doing WeBWorK development, please also see SVN Commit Access. For a complete guide to Subversion, read the book Version Control with Subversion. This book is especially recommended for WeBWorK developers.
To use Subversion, you have to obtain the official command line Subversion client. Most Linux distributions will have this available in their package repositories, and many install it by default. For example,
- to install Subversion in Ubuntu do
sudo apt-get install subversion
- to install Subversion in Fedora become root and do
yum install subversion
Command line and GUI clients are also available for the Windows and Macintosh operating systems. For Windows users, TortiseSVN is recommended.
Binary installation packages and/or instructions for obtaining those packages for very many different operating systems can be found at http://subversion.apache.org/packages.html.
Information on installing Subversion from source is provided at http://subversion.apache.org/source-code.html.
The WeBWorK subversion repositories store all of the WeBWorK code and the National Problem Library. These repositories are hosted by the MAA at http://svn.webwork.maa.org/ and, in fact, all of the code may be viewed on the web. Subversion also stores the history of all changes to WeBWorK, and copies of all development and production releases.
There are two main WeBWorK repositories. The two repositories are
These two repositories contain all of the necessary WeBWorK software and the National Problem Library. There may be a few other problem library repositories (such as rochester), but those will soon be folded into the NPL.
If you look into these repositories, you will find three main subdirectories. Each repository uses a the fairly standard hierarchy:
The primary development work is done in the trunk subdirectory. WeBWorK itself is in the webwork2 subdirectory of the trunk, and the PG code is in the pg subdirectory of the trunk. Since many WeBWorK servers run the code in this tree for production usage, patches made in this tree must not break the code. Developers should also avoid rewriting extensive portions of the trunk as well. Such work is typically done in development branches. The trunk of the system repository has many other subdirectories, but these contain specialized sub-projects.
branches is used for major coding work, testing huge patches, and testing unstable patches. Some developers may have their own branch of the code here. It is also used to prepare new stable releases. Each major stable series gets its own directory as rel-<major_version>-<minor_version> or rel-<major_version>-<minor_version>-patches. For example, the current stable release of the WeBWorK code is rel-2-4-patches.
tags is a special hierarchy used to save the state of the software at a given point in the time. You should NEVER make any change to it as this is only useful when releasing new versions. That task is handled solely by the WeBWorK release managers.
The access mechanism to the WeBWorK subversion repositories allows anonymous users to perform any operation which involves only reading data from the repository. For most users, this usually means just svn checkout and svn update, but there are many other more specialized read only subversion commands detailed in the official Subversion book.
Writing data to the repository (such as modifying the WeBWorK code) requires commit access. Like most open-source projects which use a version control system for source code management, the WeBWorK developers grant commit access on a case-by-case basis to individuals who wish to get involved with WeBWorK development and have demonstrated the skills for doing so. See Commit access requests for more information on obtaining commit access, and SVN Commit Access for a discussion of how to use it for development.
As mentioned above, the WeBWorK repositories are configured so that anonymous users may perform any read operation (such as svn checkout, svn update, etc.) Below, we discuss the basic use of the most common read-only operations. This article does not discuss commands useful to developers who have commit access. That information can be found in SVN Commit Access. Note that unlike CVS Subversion does not require developers to check out an authenticated working copy in order to commit changes. Access control is only used for commits.
The most common use of subversion is to download or checkout the WeBWorK software. In fact, we strongly recommend that you obtain the code via Subversion when installing WeBWorK. For each stable release, we also provide a compressed tarball containing all of the necessary software, but installing WeBWorK from the tarball makes in much more difficult to keep up with updates and bugfixes, and should only be done if subversion cannot be used for some reason. (Click here to get the tarball if you want it.)
To checkout the WeBWorK code and the National Problem Library, you will issue commands with the following syntax. (Note that "co" is short for "checkout" and either may be used.)
svn co http://svn.webwork.maa.org/<repository>/<trunk, branch or tag>/<files> target_directory
In other words, after the base url http://svn.webwork.maa.org, you must first specify the repository (in most cases either /system or /npl). The repository is followed by trunk or a specification of the branch or tag you wish to obtain, and following that you must specify the particular files you wish to download. (The files are typically specified simply by referring to a subdirectory of the repository, such as webwork2, pg or NationalProblemLibrary.)
The target_directory is where in your file system you wish to place the code. Standard installation instructions recommend that the webwork2 code go in /opt/webwork/webwork2, the pg code go in /opt/webwork/pg and the National Problem Library go in /opt/webwork/libraries/NationalProblemLibrary. If target_directory is omitted, the files will be placed in a subdirectory of your current working directory.
So, to review, the required URL structure is:
- /system or /npl (or /rochester/),
- trunk, branch or tag
- /trunk, or e.g., /branches/rel-2-4-patches, or /tags/rel-2-4-7, etc.,
- /webwork2 or /pg (in the system repo) or /NationalProblemLibrary (in the npl repo).
- the trunk, which is the main development branch.
- the branches, which are used for stable versions of the core WeBWorK and PG code; and for the development of complex features.
- and the tags, which are used to track changes in the released versions.
Note that unlike the old CVS, the URL is used to specify the branch or the tag.
Here are some common examples:
To check out the WeBWorK 2 development trunk into the folder "webwork":
svn co http://svn.webwork.maa.org/system/trunk/webwork2 webwork
To check out the PG development trunk into the folder "webwork":
svn co http://svn.webwork.maa.org/system/trunk/pg webwork
To check out the National Problem Library development trunk into the folder "webwork/libraries":
svn co http://svn.webwork.maa.org/npl/trunk/NationalProblemLibrary webwork/libraries
Many institutions run their WeBWorK installation off of the trunk, and developers are careful to allow this by ensuring changes in the trunk are incremental and do not break the code. In that case the previous three commands will get you all of the WeBWorK software you need to install the system on your machine. (See the appropriate installation manual for information on how to configure your system and complete your WeBWorK installation from here.)
Many other institutions prefer to run their WeBWorK installation off of the current stable release. Doing so will provide a bit more stability. However, updates to such releases only include bugfixes, and you may not have access to the latest features until you upgrade to a new stable release containing those features. This is a trade-off, and each institution will must this decide for themselves.
To checkout the stable release 2.5.0 (September 2011) of the webwork2 and pg code, go to the folder webwork and do
svn co http://svn.webwork.maa.org/system/trunk/webwork2 webwork svn co http://svn.webwork.maa.org/system/trunk/pg webwork
To obtain more recent releases of the webwork2 and pg code using svn go to the folderwebwork and do
Note that the National Problem Library repository is not branched - the trunk should always be used. Updates to the NPL usually include only bugfixes in library problems, and occasionally include the addition of new problem libraries contributed from institutions which use WeBWorK. Such changes will never affect the stability or security of your WeBWorK installation, and so regardless of whether your WeBWorK installation is run from the trunk or from the current stable release, you should use the command
svn co http://svn.webwork.maa.org/npl/trunk/NationalProblemLibrary webwork/libraries
to checkout the National Problem Library.
One final comment on branches: All stable releases of the WeBWorK 2 code can be checked out of the repository from 2.0 up to the current stable release (i.e. rel-2-0-patches, rel-2-1-patches, rel-2-2-patches, etc. up to the current stable release). Again, there are no corresponding branches for the NPL, just get the trunk.
Now we come to the third of the three main divisions in the repository: tags. Tags are simply used to mark a particular state of the files in the repository, and are generally used for development purposes or for preparing a stable release (which will appear as a branch). These tagged versions of the software can be checked out just like the trunk or any branch.
For example, the rel-2-4-7 tag is used to mark a particular point in the changes to the WeBWorK code released as version 2.4. To check out this particular version of the webwork2 and pg code do:
svn co http://svn.webwork.maa.org/system/tags/rel-2-4-7/webwork2 svn co http://svn.webwork.maa.org/system/tags/rel-2-4-7/pg
Each time a commit is made to a repository, Subversion increments the revision number of the files and directories changed by the commit. Revision numbers allow users very fine-grained control over exactly which version of the software they check out. Subversion will report the current revision number of the repository as a whole each time a checkout is made.
For example, to check out a specific revision in the trunk of the webwork2 code, say revision 6000, do
svn co http://svn.webwork.maa.org/system/trunk/webwork2@6000 some_target_directory
svn checkout -r 6000 http://svn.webwork.maa.org/system/trunk/webwork2 some_target_directory
This can be useful, for example, if your installation is tracking the trunk, and some change is made which breaks your installation or causes unwelcome behavior (rare, but possible). In that case, you can switch to the last known good revision (or any revision) with the command
svn update -r <number>
|Warning :||Don't leave off the "trunk", "branch" or "tag" part of any checkout. If you leave that off you check out every revision of every file in the repo, which is pretty silly and takes a long time.|
Updating your working copy
Note that in the parlance of subversion, code you have checked out from the repository is referred to as your working copy. One of the primary benefits of using a version control system such as subversion is that it becomes very easy to keep up with updates to the code, including patches, bugfixes, and even larger development changes.
And, once you have obtained a working copies of the webwork2, pg and NationalProblemLibrary you will want to keep them up to date by using subversion to regularly update them.
Happily, this is very easy to do. To update your working copy and get the latest files, switch to the directory you wish to update and use the following command:
svn update (or just: "svn up")
As mentioned above, if desired, you can easily back out of an update by switching back to the appropriate revision number. Also, note that SVN, unlike CVS, doesn't need to be told to prune removed files or create new directories. This is automagic.
This concludes our introduction to subversion and discussion of the structure of the WeBWorK subversion repositories and the two most frequently used subversion commands svn checkout and svn update.
As mentioned above, there are many more read-only commands available to anonymous users. SVN Commit Access primarily discusses commit operations, but also contains a discussion of some read-only operations which may be of interest to those who have made changes to their local working copy of the WeBWorK code but who have not yet begun managing those changes through the central WeBWorK subversion repository or contributing those changes back to the WeBWorK project.
If you are actively modifying WeBWorK to improve it or add new features, we encourage you to make those changes available to all WeBWorK developers and users by managing your development through a branch in the WeBWorK SVN repositories. Doing so is the easiest way for the lead developers to see how your changes can be incorporated into the current code base and the quickest way for your improvements to have wide usage and benefit the students and instructors who use WeBWorK. (Also, they are very talented and might be able to help you!)
Please see the links below for additional information, particularly for those who have (or want) commit access.
- History of WeBWorK version control
- Converting a CVS checkout to SVN
- Commit access requests
- SVN Commit Access
- Development policy