# Difference between revisions of "Available Functions"

Line 8: | Line 8: | ||

* Parentheses: () - You can also use square brackets, [ ], and braces, { }, for grouping, e.g. [1+2]/[3(4+5)] |
* Parentheses: () - You can also use square brackets, [ ], and braces, { }, for grouping, e.g. [1+2]/[3(4+5)] |
||

* Note: 1/2x is evaluated from left to right and means <math>\frac{1}{2}x</math> which might not have been what you meant. |
* Note: 1/2x is evaluated from left to right and means <math>\frac{1}{2}x</math> which might not have been what you meant. |
||

+ | √ |
||

====Syntax for entering expressions==== |
====Syntax for entering expressions==== |

## Revision as of 05:25, 23 February 2021

## Contents

#### Mathematical Symbols Available In WeBWorK

- + Addition
- - Subtraction
- * Multiplication can also be indicated by a space or juxtaposition, e.g. 2x, 2 x or 2*x, also 2(3+4).
- / Division
- ^ or ** You can use either ^ or ** for exponentiation, e.g. 3^2 or 3**2
- Parentheses: () - You can also use square brackets, [ ], and braces, { }, for grouping, e.g. [1+2]/[3(4+5)]
- Note: 1/2x is evaluated from left to right and means [math]\frac{1}{2}x[/math] which might not have been what you meant.

√

#### Syntax for entering expressions

**Use the "Preview Button" to see exactly how your entry looks. E.g. to tell the difference between 1+2/3*4 and (1+2)/(3*4) click the "Preview Button".**- Sometimes using the * symbol to indicate multiplication makes things easier to read. For example (1+2)*(3+4) and (1+2)(3+4) are both valid. So are 3*4 and 3 4 (3 space 4, not 34) but using a * makes things clearer.
- Use ('s and )'s to make your meaning clear. You can also use ['s and ]'s and {'s and }'s (except in contexts where those have special meanings, like creating intervals or sets).
- Don't enter 2/4+5 (which is 5.5) when you really want 2/(4+5) (which is 2/9).
- Don't enter 2/3*4 (which is 8/3) when you really want 2/(3*4) (which is 2/12).
- Entering big quotients with square brackets, e.g. [1+2+3+4]/[5+6+7+8], is a good practice.
- Be careful when entering functions. It's always good practice to use parentheses when entering functions. Write sin(t) instead of sint or sin t even though WeBWorK is smart enough to
**usually**accept sin t or even sint. For example, sin 2t is interpreted as sin(2)t, i.e. (sin(2))*t, so be careful. - You can enter sin^2(t) as a shortcut although mathematically speaking sin^2(t) is shorthand for (sin(t))^2 (the square of sin of t). (You can enter it as sin(t)^2 or even sint^2, but don't try such things unless you
**really**understand the precedence of operations. The "sin" operation has highest precedence, so it is performed first, using the next token (i.e. t) as an argument. Then the result is squared.) You can always use the Preview button to see a typeset version of what you entered and check whether what you wrote was what you meant. :-) - For example 2+3sin^2(4x) will work and is equivalent to 2+3(sin(4x))^2 or 2+3sin(4x)^2. Why does the last expression work? Because things in parentheses are always done first [ i.e. (4x)], next all functions, such as sin, are evaluated [giving sin(4x)], next all exponents are taken [giving sin(4x)^2], next all multiplications and divisions are performed in order from left to right [giving 3sin(4x)^2], and finally all additions and subtractions are performed [giving 2+3sin(4x)^2].
- Is -5^2 positive or negative? It's negative. This is because the square operation is done before the negative sign is applied. Use (-5)^2 if you want to square negative 5.
- When in doubt use parentheses!!! :-)
- The complete rules for the precedence of operations, in addition to the above, are
- Additions and subtractions are performed left to right: 1-2+3 = (1-2)+3 = 2.
- Multiplications and divisions are performed left to right: 2/3*4 = (2/3)*4 = 8/3.
- Exponents are taken right to left: 2^3^4 = 2^(3^4) = 2^81 = a big number.

**Use the "Preview Button" to see exactly how your entry looks. E.g. to tell the difference between 1+2/3*4 and [1+2]/[3*4] click the "Preview Button".**

#### Mathematical Constants Available In WeBWorK

- pi This gives 3.14159265358979, e.g. cos(pi) is -1
- e This gives 2.71828182845905, e.g. ln(e*2) is 1 + ln(2)

#### Scientific Notation Available In WeBWorK

- 2.1E2 is the same as 210
- 2.1E-2 is the same as .021

#### Interval Notation

Some problems require you to enter an interval of real numbers.

- (-2,5) the open interval from -2 to 5, i.e. all real numbers greater than -2 and smaller than 5
- [2,5) the half-open interval containing all real numbers greater than or equal to 2 and smaller than 5
- (-inf, 10] all real numbers less than or equal to 10 (inf stands for infinity)

#### Mathematical Functions Available In WeBWorK

Unless otherwise specified, all of the functions listed below are enabled by default. However, sometimes one or more of these functions is disabled for a particular WeBWorK problem because the instructor wants you to calculate the answer by some means other than just using the function.

- sqrt(x) -- The square root of x. Also can be written x^(1/2).
- abs(x) -- The absolute value of x. Also can be written |x|.

##### Exponential and Logarithmic Functions

- ln(x) -- The natural logarithm (logarithm to the base e)
- log(x) -- This is usually the natural log but your professor may have redefined this as log to the base 10

##### Trigonometric Functions

**Note**: All of the trigonometric functions use **radian** measure.

- sin(x)
- cos(x)
- tan(x)
- cot(x)
- sec(x)
- csc(x)

- arcsin(x), asin(x), or sin^-1(x)
- arccos(x), acos(x), or cos^-1(x)
- arctan(x), atan(x), or tan^-1(x)
- arccot(x), acot(x), or cot^-1(x)
- arcsec(x), asec(x), or sec^-1(x)
- arccsc(x), acsc(x), or csc^-1(x)

##### Hyperbolic Trig Functions

- sinh(x)
- cosh(x)
- tanh(x)
- sech(x)
- csch(x)
- coth(x)

- arcsinh(x), asinh(x), or sinh^-1(x)
- arccosh(x), acosh(x), or cosh^-1(x)
- arctanh(x), atanh(x), or tanh^-1(x)
- arcsech(x), asech(x), or sech^-1(x)
- arccsch(x), acsch(x), or csch^-1(x)
- arccoth(x), acoth(x), or coth^-1(x)

##### Other Functions

- n! -- n factorial (defined for nonnegative integers), can also be written as fact(n)
- sgn(x) -- the sign function, either -1 (if x < 0), 0 (if x = 0), or 1 (if x > 0)

These functions are available for some problems, but may not be enabled for others (for authoring information see step functions):

- step(x) -- the step function (1 if x > 0, 0 otherwise.)
- P(n,k) = n*(n-1)*(n-2)...(n-k+1) the number of ordered sequences of k elements chosen from n elements

The following functions are not enabled in student answers by default:

- C(n,k) = "n choose k" the number of unordered sets of k elements chosen from n elements
- ceil(x) The ceiling function that rounds up to the nearest integer
- floor(x) The floor function that rounds down to the nearest integer
- max(x,y) The max function
- min(x,y) The min function

These can be used in authoring problems if `PGauxiliaryFunctions.pl`

is included in the problem. In order to use P(n,k) and C(n,k), you must be in the IntegerFunctions context.