Installation Manual for 2.17 on Oracle (and related) Linux

From WeBWorK_wiki
Revision as of 23:04, 16 September 2022 by Alex Jordan (talk | contribs)
Jump to navigation Jump to search

These instructions cover the installation of WeBWorK 2.17 from scratch onto a new Oracle Linux 8 server. These instructions might work on related Linux distributions such as RHEL 8, but the details may differ. Even on an Oracle 8 server, the template that was used while writing these instructions may have different packages and repositories than yours. So in some steps, you may find that you need to install some component that is missing first.

It may help to cross-reference with other OS-specific installation guides at Manual Installation Guides.

If you are merely upgrading WeBWorK, as opposed to a fresh installation, see Upgrading WeBWorK from 2.16 to 2.17.


Read this section before getting started.

OS Users

These instructions reference four OS users.

  • You should have a personal account with sudo privileges.
  • root
  • apache
  • wwadmin

When you get started, root and your personal user account should be present. It can be critical that you act as whatever user these instructions tell you to act as at each step. Do not act as root unless specifically instructed to.

Furthermore, when you need to act as root, you are advised to use sudo bash, sudo su, or sudo <command> exactly as the instructions say. Failing to do so can result in bad things that may not become apparent until later in the process.


  • Code blocks that begin with $ should be run with your personal user account (which we assume has sudo privileges).
  • Code blocks that begin with # should be run as root (via either a root shell or switching users to root with sudo su).
  • Code blocks that begin with @ should be run as wwadmin (for which you can use sudo su wwadmin).

You are not intended to type the $, or #, or @ characters as part of the provided commands.


We assume that you already have Oracle installed (or a closely related Linux distribution) but that you haven't done much with yet.

We assume that you have a personal user account with sudo privileges.

Check perl version

For this write-up, the perl version was 5.26.3. Check if perl is installed and what its version is.

$ perl --version

If you have a different version, that could be OK and you can try to continue. But if you run into obstacles, it is possible that the perl version is responsible. The Installation Manual for 2.16 on RHEL8 installs a custom version of perl for this reason, and you may need to do that.



After logging in to your server:

$ sudo yum install mariadb-server mariadb-connector-c mariadb-connector-c-devel

Answer y if it asks if this is OK. (For the remainder of these instructions, such trivial details might be omitted.) Now fire it up.

$ sudo systemctl enable mariadb
$ sudo systemctl start mariadb

Check that it is active with

$ sudo systemctl status mariadb

Now secure the server.

$ sudo mysql_secure_installation

This asks you for the database root password, which is nothing at this point. You should just hit <Enter>. Next there are five questions. Answer as indicated:

  • Set root password? n
  • Remove anonymous users? n
  • Disallow root login remotely? Y
  • Remove test database and access to it? Y
  • Reload privilege tables now? Y

Test that things work:

$ sudo mysql

You should see something close to:

Welcome to the MariaDB monitor.  Commands end with ; or \g.

MariaDB [(none)]> 

Now lets check the MariaDB users. To see the users, do the following

MariaDB> SELECT user,authentication_string,plugin,host FROM mysql.user;

You should see a table with only three users: root, root and root, each with a different host.

WeBWorK user and database

WeBWorK uses a single database, called webwork, for all courses. We will create the webwork database now. We also need to create a database user named webworkWrite and supply a password for that user. Use some secure password generator to generate a password that has no special characters. (Special characters in a database password sometimes cause trouble.) Write down this password because we will need it later.

In the steps below, we use dAtAbAsE_pAsSwOrD for this password. The obnoxious casing is to help you remember to replace that with what your actual password is.

MariaDB [(none)]> CREATE DATABASE webwork;
MariaDB [(none)]> CREATE USER 'webworkWrite'@'localhost' IDENTIFIED BY 'dAtAbAsE_pAsSwOrD';
MariaDB [(none)]> GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, ALTER, DROP, LOCK TABLES ON webwork.* TO 'webworkWrite'@'localhost';
MariaDB [(none)]> exit

where as we said replace dAtAbAsE_pAsSwOrD with the password you generated.

And again, hold on to this password. We will need to enter it into a WeBWorK configuration file later.

Apache 2 and mod_perl


Install apache (httpd) and mod_perl.

$ sudo yum install httpd mod_perl libapreq2 perl-libapreq2

Enable httpd service.

$ sudo systemctl enable httpd.service

Configuration Changes

Now enable the MPM-prefork module (and disable the MPM-event module)

$ sudo bash
# vim /etc/httpd/conf.modules.d/00-mpm.conf

Uncomment the mpm_prefork_module statement and comment out the mpm_event_module

LoadModule mpm_prefork_module modules/
#LoadModule mpm_event_module modules/

After the line LoadModule mpm_prefork_module modules/ that you just uncommented, add the lines:

<IfModule mpm_prefork_module>
    # For WeBWorK a rough rule of thumb is 5 MaxRequestWorkers per 1 GB of memory
    MaxRequestWorkers         5
    MaxConnectionsPerChild    50

where you should set MaxRequestWorkers depending on the amount of memory your server has using the above rule of thumb. Note that for very busy servers, you should observe you memory usage and return here tto adjust the above settings as necessary. Save the file and quit.

Next we add configuration files that will add the mod_perl and Apache request modules.

# vim /etc/httpd/conf.modules.d/02-perl.conf

The line LoadModule perl_module modules/ may already be there. If so, good! If not, add that line and save the file. Then quit.

# vim /etc/httpd/conf.modules.d/apreq.conf

The line LoadModule apreq_module modules/ may already be there. If so, good! If not, add that line and save the file. Then quit.

Next we will make a few changes to Apache's default configuration. First, we back up the original.

# cd /etc/httpd/conf
# cp httpd.conf httpd.conf.bak
# vim httpd.conf

Near the end, before "Supplemental configuration", add the line:

Timeout 1200 

Also, uncomment and change the server name:


For this installation write-up, the server's fully qualified domain name was already set up. You can confirm if this is the case for you by running: hostname; hostname --fqdn. If your server's fully qualified domain name is not yet set up, run the command sudo hostnamectl set-hostname <webwork> where of course you should replace <webwork> by whatever your server's name is. Again, you can check these settings by running the commands hostname; hostname --fqdn. The first gives the server's fully qualified domain name (e.g. and the second the server's name (e.g. webwork). Note that if your server can not find its fully qualified domain name, certain tools may not start.

Then save the file and quit.

Now disable the HTTP/2 module to avoid spamming the error log.

# cd /etc/httpd/conf.modules.d
# mv 10-h2.conf 10-h2.conf.bak

Finally, we need to make sure that the shared libraries have been properly identified

# ldconfig -v
# exit


You should now be able to start up the httpd service

$ sudo systemctl start httpd

Check its status just to confirm it's up.

$ sudo systemctl status httpd

and test your server by connecting to your server from a web browser using the fully qualified domain name. You should see the Apache 2 Test Page indicating that Apache is running.

Install Miscellaneous Tools


The Oracle/RHEL package for texlive is likely to be a few years out of date, so we will install texlive directly. At the time of this installation write-up, the current version is 2022. In the steps that follow, replace "2022" with whatever is current. Note the very last option --paper=letter is only if you actually want letter to be the default paper size. Leave that off if you would like it to be A4.

$ cd /tmp # working directory of your choice
$ sudo yum install wget
$ wget
$ zcat install-tl-unx.tar.gz | tar xf -
$ cd install-tl-*/
$ sudo perl ./install-tl --no-interaction --paper=letter

This could take a while because it is a full installation. A full installation is probably unnecessary, but now that WeBWorK can use LaTeX to make images, it's simpler to just go ahead and install everything so you are not surprised later by a missing package.

Now you might want to clean up the installation files.

$ cd ..
$ sudo rm -r install-tl* 

Some graphics packages

Some graphics tools were installed with our new LaTeX installation: dvipng and dvisvgm. We need a few more.

$ sudo yum install gd-devel netpbm-progs ImageMagick


And we will need Node Package Manager, npm:

$ sudo yum install npm

Installing WeBWorK

Downloading WeBWorK

Create the wwadmin user and give that user a password that you store securely somehwere. Having a wwadmin user who is distinct from your personal user account will help in the future when others might take over management of the server, or assist with management.

$ sudo useradd wwadmin
$ sudo passwd wwadmin

Give wwadmin some secure password.

Now edit wwadmin's .bashrc as we did with your personal user's .bashrc.

$ sudo vim /home/wwadmin/.bashrc

Add these lines to the end:

export PATH=/usr/local/texlive/2022/bin/x86_64-linux:$PATH:/opt/webwork/webwork2/bin
export WEBWORK_ROOT=/opt/webwork/webwork2
export PG_ROOT=/opt/webwork/pg

Except the "2022" and "x86_64-linux" may be different as before.

Save the file and quit.

We are finally at the point where we can start downloading and installing WeBWorK itself. We will use Git to download WeBWorK from Github.

$ cd /opt
$ sudo mkdir webwork
$ sudo chown wwadmin:wwadmin webwork
$ sudo su wwadmin
@ cd webwork
@ git clone
@ git clone
@ git clone
@ mkdir courses
@ mkdir libraries
@ mv webwork-open-problem-library libraries 

Important Note. The above commands retrieve the main branch which gives the latest stable release of the software package (webwork2, pg, etc) with bug fixes. If a stable release newer than 2.17 exists, that will be downloaded and these instructions may be a little out of date. So it is a good idea to check before downloading. The best way to do that is to look at and

Set Up Model Course

Now pull the model course from webwork2 into courses

@ cd /opt/webwork/webwork2/courses.dist
@ cp *.lst /opt/webwork/courses/
@ rsync -a modelCourse /opt/webwork/courses/

Setting Permissions

The PG installation directory and files should be owned by wwadmin and not writable by other users:

@ cd /opt/webwork/pg
@ chmod -R u+rwX,go+rX .

Most WeBWorK directories and files should also be owned by wwadmin and not writable by other users:

@ cd /opt/webwork/webwork2
@ chmod -R u+rwX,go+rX .
@ exit

Certain data directories need to be writable by the web server. These are DATA, courses, htdocs/tmp, logs, and tmp. Now we make these directories that need to be writable by the web server have apache as their group.

$ sudo bash
# cd /opt/webwork/webwork2/
# chgrp -R apache DATA ../courses htdocs/tmp logs tmp
# chmod -R g+w DATA ../courses htdocs/tmp logs tmp
# find DATA/ ../courses/ htdocs/tmp logs/ tmp/ -type d -a -exec chmod g+s {} \;
# chcon -R -t httpd_sys_rw_content_t DATA ../courses htdocs/tmp logs tmp
# chcon -R -t httpd_sys_content_t /opt/webwork/

The chcon lines are specific to SELinux to give the apache user certain privileges in those folders that are denied by default. Here is some more SELinux stuff to run.

# yum install policycoreutils-python-utils
# semanage fcontext -a -t httpd_sys_content_t '/opt/webwork(/.*)?' 
# semanage fcontext -a -t httpd_sys_rw_content_t '/opt/webwork/courses(/.*)?'
# semanage fcontext -a -t httpd_sys_rw_content_t '/opt/webwork/webwork2/logs(/.*)?'
# semanage fcontext -a -t httpd_sys_rw_content_t '/opt/webwork/webwork2/htdocs/tmp(/.*)?'
# setsebool -P httpd_can_sendmail 1
# setsebool -P httpd_can_network_connect on
# restorecon -vFR /opt

We also want to allow httpd to send pings during startup, which means we have to tell SELinux that's okay too. Create a new file called my-ping.te in wwadmin's home folder.

# vim /home/wwadmin/my-ping.te

Paste the following into the empty file:

module my-ping 1.0;

require {
       type httpd_t;
       class icmp_socket create;
       class rawip_socket { create getopt setopt write read };
       class capability net_raw;

#============= httpd_t ==============
allow httpd_t self:capability net_raw;
allow httpd_t self:icmp_socket create;
allow httpd_t self:rawip_socket { create getopt setopt write read };

Exit and save the file, then compile and install the policy:

# checkmodule -M -m -o my-ping.mod /home/wwadmin/my-ping.te
# semodule_package -o my-ping.pp -m my-ping.mod
# semodule -X 300 -i my-ping.pp

It is convenient to give WeBWorK administrators access to the five directories mentioned above as well, so they can perform administrative tasks such as removing temporary files, creating and editing courses from the command line, managing logs, and so on. We will add our user, wwadmin, to the apache group. Run the command

# usermod -a -G apache wwadmin
# exit

Compile color.c

$ cd /opt/webwork/pg/lib/chromatic
$ sudo yum install gcc
$ sudo su wwadmin
@ gcc color.c -o color
@ exit

You may see some warning messages which you can safely ignore.

Configuring the Shell

To make working with WeBWorK easier, there are a couple of changes you can make to your shell environment.

Add the WeBWorK bin directory to your path. This will allow you to run WeBWorK command-line utilities without typing the full path to the utility. Go to your home directory and backup your .bashrc file

$ cd
$ cp .bashrc .bashrc.bak1

Now edit .bashrc. (Alternatively, these edits can be applied to /etc/profile, which will apply to all users.)

$ vim .bashrc

After the last line add the following three lines. But note that when we installed LaTeX earlier, it maybe landed in a different place. The "2022" and "x86_64-linux" might be different for you. You can run ls -la /usr/local/texlive/*/bin/*/pdflatex to identify the appropriate values.

export PATH=/usr/local/texlive/2022/bin/x86_64-linux:$PATH:/opt/webwork/webwork2/bin
export WEBWORK_ROOT=/opt/webwork/webwork2
export PG_ROOT=/opt/webwork/pg

Then save the file and Quit.

Close your Terminal Window and open a new one so the above changes take effect. You can check that they have by

$ echo $PATH
$ echo $PG_ROOT

Checking Module Dependencies

WeBWorK includes a script called (in the directory /opt/webwork/webwork2/bin) that verifies that the needed programs and Perl modules are installed on your system. Run this script to make sure you have installed the required programs and Perl modules.

$ apache2

You probably see a lot is missing, as indicated by **.

In the executables section, the only thing that should be missing is pdf2svg, which we will not be using. If you see LaTeX executables missing, check that you correctly added the path to LaTeX executables in PATH as described above. If anything else is missing in the executables section, check if it was explicitly mentioned already in this guide, and that you completed those steps of the guide. Otherwise, maybe it just did not come with your OS installation and you should install it. You can search using yum search someExecutable and if found, install it using yum install someExecutable.

Now we will install the missing perl modules. While writing this guide, this missing ones are the ones indicated in the command a few lines below. You might need to modify.

$ sudo perl -MCPAN -e shell

You might be prompted to auto-configure. Say yes. You should be in the cpan shell and see the prompt:


Then run as follows, but compare the list of perl modules to the ones that were missing when you ran check_modules. Also, we are not using DBD::mysql even though that probably was missing. We are, however, going to need DBD::MariaDB, which was maybe not being checked for by check_modules. So include DBD::MariaDB, not DBD::mysql.

Also, we need SQL::Abstract::Classic, which might not be checked for by check_modules.

This may take a while! Keep an eye on it though because there may be occasional prompts asking if you want to conduct certain tests. Say yes to the tests unless you have a good reason not to.

cpan[1]> install Array::Utils CGI CGI::Cookie Class::Accessor Data::Dump Data::UUID Date::Format Date::Parse DateTime DBD::MariaDB DBI Email::Address::XS Email::Sender::Simple Email::Sender::Transport::SMTP Email::Stuffer Exception::Class File::Find::Rule GD HTML::Entities HTML::Scrubber HTML::Tagset HTML::Template HTTP::Async IO::Socket::SSL Iterator Iterator::Util JSON JSON::MaybeXS Locale::Maketext::Lexicon LWP::Protocol::https Net::IP Net::LDAPS Net::OAuth Net::SSLeay PadWalker Path::Class PHP::Serialization Pod::WSDL SOAP::Lite SQL::Abstract::Classic Statistics::R::IO String::ShellQuote Template Text::CSV Tie::IxHash Time::Zone Types::Serialiser UUID::Tiny XML::Parser XML::Parser::EasyTree XML::Simple XML::Writer XMLRPC::Lite YAML::XS Apache2::Request

At a certain point, you may see a prompt with a message about JSON::XS possibly not working with the version of perl we are using. For this write-up, the perl version is 5.26, and everything worked out fine.

You may see questions about the XS Stash module. You can answer yes.

You may see questions like "Do you want to install 'xml_...'. You can answer yes.

You might encounter this message:

 Your Perl is configured to link against libgdbm, 
 but was not found.
 You could just symlink it to /lib64/

I hit q and it was fine.

When it's all done, you can exit.

cpan[2]> exit

Now run apache2 as before to see if something didn't work. You may see that Apache2::Request is found, but failed to load. This is probably OK. I believe it means that check_modules is missing some configuration detail that WeBWorK itself will have in place.

You might also see some warning messages like

Prototype mismatch: sub main::from_json: none vs ($@) at (eval 188) line 2.
Prototype mismatch: sub main::to_json: none vs ($@) at (eval 188) line 2.

This seems to be a known bug in libjson-perl and can be safely ignored.

Check LaTeX dependencies

Now we check that all necessary LaTeX packages have been installed. Earlier we did a full LaTeX installation, so everything should be there.

$ check_latex

and look for missing packages (you can ignore "No file check_latex.aux."). If the script displays "Compilation Success!", then all is good!

Initialize WeBWorK config files

$ sudo su wwadmin
@ cd /opt/webwork/webwork2/conf
@ cp webwork.apache2.4-config.dist webwork.apache2.4-config
@ cp site.conf.dist site.conf

Now edit site.conf and enter your value for $server_root_url.

@ vim site.conf

After entering a value for $server_root_url as the comments in the file describe. save the file and exit.

@ cp localOverrides.conf.dist localOverrides.conf
@ exit
$ sudo ln -s /opt/webwork/webwork2/conf/webwork.apache2.4-config /etc/httpd/conf.d/webwork.conf

Copy WeBWorK's icon file favicon.ico to Apache's www directory. Also, create a dummy index.html file here to avoid complaints from apache.

$ sudo cp /opt/webwork/webwork2/htdocs/favicon.ico /var/www/html
$ sudo touch /var/www/html/index.html

Now stop and start apache.

$ sudo systemctl stop httpd
$ sudo systemctl start httpd

You should be able to visit WeBWorK in a web browser now, although it will show errors. In a web browser, visit http://server_root_url/webwork2, where server_root_url is what you used above in site.conf.

More site.conf configuration

Edit site.conf again.

$ sudo su wwadmin
@ vim site.conf

The most critical thing is to enter that password for the database user webworkWrite. Earlier in this guide we called that "dAtAbAsE_pAsSwOrD". You should have it written down somewhere, and you need to enter that in site.conf where $database_password is defined.

Our custom LaTeX installation landed at /usr/local/texlive/YEAR/bin/PLATFORM/, where YEAR and PLATFORM are something specific. You can run ls -la /usr/local/texlive/*/bin/*/pdflatex to determine exactly where on your system. Change the paths on the following to reflect this location.

  • $externalPrograms{latex} (Keep the --no-shell-escape option in place!)
  • $externalPrograms{pdflatex} (Keep the --no-shell-escape option in place!)
  • $externalPrograms{dvipng}
  • $externalPrograms{dvisvgm}

Scroll back to the top of site.conf and work your way down, reviewing all of the settings. Here are the ones that you probably want/need to set:

  • $webwork_server_admin_email
  • $mail{smtpServer}
  • $mail{smtpSender}
  • $mail{set_return_path}
  • $siteDefaults{timezone}

Save the file and exit.

Now stop and start apache.

$ sudo systemctl stop httpd
$ sudo systemctl start httpd

Javascript and css assets

Earlier we installed npm. Visit the htdocs folder in the webwork2 and pg repositories, and run npm install like this:

@ cd /opt/webwork/webwork2/htdocs
@ npm install
@ cd /opt/webwork/pg/htdocs
@ npm install

The last npm install might appear to stall, but be patient. I got impatient and hit <ENTER> and then it appeared things sped up. Give that a try if you feel like it.

This installs javascript and css assets used by WeBWorK. Now you can return to your web browser and visit http://server_root_url/webwork2 (where "server_root_url" is your fully qualified domain) and reload the page. It should look good with no error messages.

Create the admin course

WeBWorK has one "course" named admin that serves as a GUI for course management. We need to create that course.

@ cd /opt/webwork/courses
@ /opt/webwork/webwork2/bin/addcourse admin --db-layout=sql_single --users=adminClasslist.lst --professors=admin

Now go to and should see the WeBWorK home page with Course Administration listed at the top. Click on it and login with Username admin and Password admin . This first thing you should do is register your new WeBWorK installation. It's quick and easy, just click on Register. IMPORTANT The next thing you should do is click on User Settings and change admin's password to something more secure than admin.

Unless you choose otherwise, users with admin privileges in the admin course (i.e. WeBWorK administrators) will automatically be added to new courses with admin privileges and the same password as in the admin course. Initially the only such user is admin (hopefully you are not confused by the fact that the course admin has a user named admin). It's usually convenient make yourself a WeBWorK administrator. To do this (assuming you are logged in as admin to the admin course at )

  1. Click on Classlist Editor in the left panel
  2. Click the Add tag and click Take Action!
  3. Enter the appropriate information (you can use your Login Name as the Student ID if you want and also you can leave the last three items blank) and click Add Students
  4. Click on Classlist Editor in the left panel again
  5. When you enter a new user, by default their Student ID is used as their password. We'll change this now.
  6. Select yourself with a check mark and click the Password tag and click Take Action!. (Note as a safely mechanism you can not change the password for the user you are logged in as, currently admin, this way)
  7. Enter the password and then click Take Action!
  8. Finally give yourself admin privileges by selecting yourself with a check mark, clicking the Edit tag and then clicking Take Action! (or by just clicking on the "pencil" next to your login name which is a much faster way to edit classlist data for a single user)
  9. Now at the far right change Permission Level from student to admin
  10. Then click Take Action!

Open Problem Library

The Open Problem Library consists of both WeBWorK problems and methods for searching and selecting problems. Also it contains as sub libraries many of the other standard libraries. We have to load a database for searching it.

Run the OPL-update script which will download the OPL metadata release and checkout the corresponding tag in the library as needed for the Library Browser in WeBWorK. Since this is a new installation, we do not have any OPL statistics to upload (see OPL_Problem_Statistics), so we run the two commands:

@ OPL-update

If at some time in the future you want to upgrade the Problem Library, the process is easy, see Updating the OPL. Note that this is something you should do fairly often so that your library is up to date with new problems and bug fixes for old ones.


Edit localOverrides.conf.

@ cd /opt/webwork/webwork2/conf
@ vim localOverrides.conf

Make your way through this file to configure the behavior of WeBWorK itself. (As opposed to site.conf, which is more for telling WeBWorK about how your server is configured.) Here are a few things to draw your attention to.

  • You need to uncomment $pg{specialPGEnvironmentVars}{latexImageSVGMethod} = "dvisvgm"; because the default is to use pdf2svg, which wee do not have, because it is very difficult (or impossible?) to install on Oracle. Anyway, dvisvgm makes better output as long as the version is new enough. And with our custom LaTeX installation, it should be new enough.
  • Set values for $institutionLogo, $institutionURL, and $institutionName. For the logo, you need to place that image file in /opt/webwork/webwork2/htdocs/themes/math4/images/. You may need to repeat the chcon -R -t httpd_sys_content_t /opt/webwork/ command that we ran earlier so that apache can read and serve this file.
  • Uncomment the line for $webworkFiles{site_info}. Visit /opt/webwork/webwork2/htdocs/ and copy site_info.txt to our_site_info.txt, and then edit that file as you like. This is the information panel you see when you visit WeBWorK's landing page.
  • If you plan to integrate WeBWorK into an LMS, you can uncomment include("conf/authen_LTI.conf");. However you should probably review LTI-Advanced Authentication first and follow up with other configuration settings.

Now stop and start apache.

$ sudo systemctl stop httpd
$ sudo systemctl start httpd

Check configuration edits

Since we have edited site.conf and localOverrides.conf and these are critical files, it would be a good idea to run

@ cd /opt/webwork/webwork2/conf
@ diff site.conf.dist site.conf
@ diff localOverrides.conf.dist localOverrides.conf

and check that you haven't made any mistakes (e.g. by introducing an inadvertent line break, etc.). If there are any mistakes, correct them. Any time you change either of these files you must restart the Apache webserver in order for some of these changes to take effect.

Now log into the admin course ( ) as yourself or admin and

  1. click on Add Course
  2. For Course ID enter myTestCourse
  3. For Course Title enter My Test Course
  4. Enter your institution
  5. Leave Add WeBWorK administrators to new course and Copy simple configuration file to new course checked
  6. Add an additional instructor if you wish
  7. Copy templates from: modelCourse (the default action)
  8. Click on Add Course
  9. Click Log into myTestCourse

and log in either as admin or yourself (if you added yourself as an additional instructor above).

At some point you will probably want to "hide" myTestCourse from general view but you already know how to do that.


Hide the admin and myTestCourse courses

Log into the admin course as admin with the new password you set earlier.

Select "Hide Inactive Courses" and select the courses you want to hide (admin and myTestCourse) and click "Hide Courses". If you go back to the WeBWorK Welcome page, you will see no courses listed. You can still access these courses directly by using their url. For example http://server_root_url/webwork2/admin and http://server_root_url/webwork2/myTestCourse.

Replace the default landing page

You probably should replace /var/www/html/index.html with a page which redirects to the webwork course list at your site. Something like the following should work:

   <META http-equiv="Pragma" content="no-cache">
   <title>WeBWorK site - redirects to main page</title>
 <body style="text-align: center;">
   You probably want to use the
   <a href="">the WeBWorK list of courses page</a>

More Tools

Install R

Some WeBWorK problems rely on R. If you are sure you will not need that, you can skip this. But to continue:

# dnf config-manager --add-repo
# dnf config-manager --enable codeready-builder-for-rhel-8-x86_64-rpms
# yum install R

More to come; this page is under construction