Difference between revisions of "Moodle Assignment"

From WeBWorK_wiki
Jump to navigation Jump to search
m (→‎LTI: grammar)
 
(88 intermediate revisions by 7 users not shown)
Line 1: Line 1:
<code>wwassignment</code> is a Moodle module which defines a new activity that links to a WeBWorK problem set in any WeBWorK installation 2.4 or later. The assignment allows single sign-on (moodle users who select the WeBWorK assignment are automatically logged into WeBWorK) and the grades from the homework assignment are automatically transferred back to the Moodle gradebook. This is ready for use now as an early beta version, but not all of the moodle features (such as backup and restored are implemented) and there are several limitations.
 
  +
{{Outdated}}
   
There have been several versions of wwassignment working with different versions of Moodle and WeBWorK. The current versions are wwassignment4 which will work with moodle1.9.x and wwassignment3 which will work with moodle 1.8.x. All versions of wwassignment can be downloaded from the CVS at [http://cvs.webwork.rochester.edu/viewcvs.cgi/wwmoodle/]
 
  +
{{warning}} The Moodle Assignment Tool is no longer well supported, and may not work with current or future versions of WeBWorK or Moodle. Moving forward integration with any Learning Management System (including Moodle) should use [[LTI-Advanced Authentication|LTI]].
   
wwassignment3 and wwassignment4 are client/server webservice applications. Moodle acts as the client and any webwork installation 2.4 or later can be configured to act as a server.
 
  +
=LTI=
  +
  +
Since the Moodle Assignment module is no longer being maintained, integration with Moodle should be done via [[LTI-Advanced Authentication|LTI]]. Use the information below at your own risk.
  +
  +
=WWassignment=
  +
  +
  +
<code>wwassignment</code> is a Moodle module which defines a new activity that links to a WeBWorK problem set in any WeBWorK installation 2.4 or later. The assignment allows single sign-on (moodle users who select the WeBWorK assignment are automatically logged into WeBWorK) and the grades from the homework assignment are automatically transferred back to the Moodle gradebook.
  +
  +
  +
There is more than one "bridge" between Moodle and WeBWorK. For an overview see [[Moodle_Integration]]
  +
  +
  +
====History====
  +
  +
  +
The current version of this plugin, wwassignment5 will work with moodle2.x. For Moodle1.9.x, use the wwassignment4 module below.
  +
  +
wwassignment4 will work with moodle1.9.x
  +
(wwassignment3 which will work with moodle 1.8.x is available but no longer supported.)
  +
  +
The current version [http://webwork.maa.org/viewvc/system/trunk/wwmoodle/wwassignment4/ wwassignment5] can be downloaded using the command
  +
  +
svn co http://svn.webwork.maa.org/system/trunk/wwmoodle/wwassignment5/.
  +
  +
wwassignment5 is a client/server webservice application. Moodle acts as the client and any webwork installation 2.4 or later can be configured to act as a server. Moodle and WeBWorK do not have to be on the same server or in the same domain.
  +
  +
= wwassignment 5 (for use with Moodle 2.x)=
   
 
== Requirements ==
 
== Requirements ==
  +
*WeBWorK 2.4.5 or later
  +
*Moodle 2.x
  +
*MySQL 5.x or later (it might also work with MySQL 4.x but it has not been tested.)
   
=== wwassignment3 ===
 
  +
This version of the assignment level bridge between
  +
moodle and webwork works for Moodle 2.+ (not 2.4) and
  +
WeBWorK 2.4.+ or WeBWorK 2.5+.
   
WeBWorK 2.4.3 or later.
 
  +
The update that allows these modules to work with Moodle 2.0
Moodle 1.8.x
 
  +
were done by Jonathan Duncan, Professor of Mathematics at Walla Walla University.
  +
http://math.wallawalla.edu/~duncjo/
   
MySQL 5.x or later (it might also work with MySQL 4.x but it has not been tested.)
 
  +
== Download and Install ( wwassignment5) ==
  +
If you are updating to wwassignment5 from an earlier version of wwassignment it is safest to
  +
delete the wwassignment module using moodle's admin functions. You will need admin privileges in
  +
moodle. On the admin page to the menu: modules->activities->'manage activities' and
  +
delete the wwassignment module. Then remove the wwlink directory: moodle/blocks/wwlink
  +
and the wwassigment directory: moodle/mod/wwassignment. They will be replaced by the new directories
  +
obtained via svn.
   
=== wwassignment 4 ===
 
  +
Check out the wwassignment5 module from the WeBWorKSVN repository into your private directory.
   
WeBWorK 2.4.5 or later
 
   
Moodle 1.9.x
 
  +
<code> svn co http://svn.webwork.maa.org/system/trunk/wwmoodle/wwassignment5 </code>
   
MySQL 5.x or later (it might also work with MySQL 4.x but it has not been tested.)
 
   
== Installation ==
 
  +
To install
  +
# move the wwlink directory, currently in the blocks subdirectory,into the moodle/blocks directory
  +
# move the wwassignment directory, currently in the mod subdirectory, into the moodle/mod directory. There is no need to run a script -- simply placing these objects into the correct moodle directories will be enough.
  +
# After that a moodle administrator will need to login from the web in order to activate the new module and set up the preferences so that it points to a local webwork server. (Click on the "notifications" link if moodle does not immediately bring you to a configuration page).
  +
# The configuration of the WeBWorK server is identical to the configuration of wwassignment4 as described below. If you have been using earlier versions of wwassignment, no changes will need to be made to the webwork server configuration.
   
Check out the wwmoodle module from the WeBWorKCVS repository:
 
  +
= wwassignment 4 (for use with Moodle 1.9.5+)=
   
<code>cvs -d :pserver:anoncvs@cvs.webwork.rochester.edu:/webwork/cvs/system co wwmoodle</code>
 
   
  +
== Requirements ==
  +
*WeBWorK 2.4.5 or later
  +
*Moodle 1.9.x
  +
*MySQL 5.x or later (it might also work with MySQL 4.x but it has not been tested.)
   
This will create a <code>wwmoodle</code> directory in the current directory containing subdirectories <code> wwassignment, wwassignment2, wwassignment3</code> and <code>wwassignment4</code>. For wwassignment3 (respectively wwassignment4) run the command
 
  +
== Download and Install ( wwassignment4) ==
  +
If you are updating to wwassignment4 from an earlier version of wwassignment it is safest to
  +
delete the wwassignment module using moodle's admin functions. You will need admin privileges in
  +
moodle. On the admin page to the menu: modules->activities->'manage activities' and
  +
delete the wwassignment module.
  +
  +
Check out the wwmoodle module from the WeBWorKSVN repository:
  +
  +
  +
<code> svn co http://svn.webwork.maa.org/system/trunk/wwmoodle/wwassignment4 </code>
  +
  +
This will create a <code>wwassignment4</code> directory in the current directory containing subdirectories .
  +
  +
To update this directory from the repository simply type
  +
<code> svn update </code>
  +
in the <code>wwassignment4</code> directory
  +
  +
  +
  +
Next, run the commands
  +
  +
cd wwassignment4/bin/setup
  +
perl setup.pl
   
<code> cd wwassignment4/bin/setup</code>
 
   
<code>perl setup.pl</code>
 
   
 
and follow instructions to create the directory <code>wwassignment</code> in moodle's
 
and follow instructions to create the directory <code>wwassignment</code> in moodle's
<code>mod</directory>.
+
<code>mod directory</code>.
  +
You will need to know the path to the <code>wwmoodle</code> directory and the path to the base of the <code> moodle </code> directory.
  +
I usually copy files rather than link to them when asked to choose although that is not essential.
  +
  +
The following directories are installed in your moodle software collection
  +
  +
blocks/wwlink -- provides the "block" that allows you to choose which WW course is connected to the moodle course
  +
mod/wwassignment -- the main body of code for implementing the wwassignment module
  +
  +
== Configuration ==
  +
  +
Applies to wwassignment5 and wwassignment4
  +
   
Open Moodle and select "Notification" (you will need administrative privileges on Moodle to do this). After the database updates have run return to the main page and select Modules->Activities->WeBWorK Problem Set to configure Moodle:
+
(1) Open Moodle and select "Notification" (you will need administrative privileges on Moodle to do this). After the Moodle database updates have completed, return to the main page and select Modules->Activities->WeBWorK Problem Set to configure the Moodle side of the Moodle-WeBWorK interface:
   
 
wwassignment_webworkurl: url of webwork course: <code>http://host.name.edu/webwork2</code>
 
wwassignment_webworkurl: url of webwork course: <code>http://host.name.edu/webwork2</code>
Line 50: Line 114:
 
wwassignment_rpc_key: <code>YourSecretCodeHere</code> This must match the code defined in the WeBWorK installation (see below).
 
wwassignment_rpc_key: <code>YourSecretCodeHere</code> This must match the code defined in the WeBWorK installation (see below).
   
In the WeBWorK installation (with url: <code> http://host.name.edu/webwork2 </code>)
+
(2)In the WeBWorK installation (with url: <code> http://host.name.edu/webwork2 </code>)
 
you must make these modifications.
 
you must make these modifications.
   
In the file <code>webwork2/conf/webwork.apache-config</code>
+
(2a) In the file <code>webwork2/conf/webwork.apache-config</code>
 
uncomment the lines for the SOAP installation in the final stanzas
 
uncomment the lines for the SOAP installation in the final stanzas
 
(or add them if they are missing all together).
 
(or add them if they are missing all together).
Line 96: Line 160:
 
</pre>
 
</pre>
   
Finally you must modify one line at the top of the file:
 
  +
For installation on systems running '''Apache2''' the webwork.apache-config file
  +
needs to be configured somewhat differently.
  +
  +
Here are excerpts
  +
<pre>
  +
  +
...
  +
  +
# Customize the variable $webwork_dir below to match the location of your
  +
# WeBWorK installation.
  +
#
  +
# ATTENTION APACHE 2.2 USERS: There is a bug in mod_perl 2.0.2 that prevents the
  +
# FollowSymlinksOption from working when specified
  +
# in a <Perl> section. See below for workaround.
  +
  +
# Uncomment the ScriptAliasMatch to allow access to show-source.cgi
  +
# This allows the "show source" button to work for demonstration "courses"
  +
# See for example Davide Cervone's Knoxville lectures on math objects
  +
  +
ScriptAliasMatch /webwork2_course_files/([^/]*)/show-source.cgi/(.*) /opt/webwork/courses/$1/html/show-source.cgi/$2
  +
  +
  +
  +
PerlModule mod_perl2
  +
  +
<Perl>
  +
  +
# Set this variable to the path to your WeBWorK installation.
  +
  +
....
  +
....
  +
....
  +
  +
</Perl>
  +
  +
  +
# APACHE 2.2 USERS: uncomment the following lines and customize the paths.
  +
# The path for this block should be $webwork_htdocs_dir.
  +
<Directory /opt/webwork/webwork2/htdocs>
  +
Options FollowSymLinks
  +
</Directory>
  +
# The path for this block should be $webwork_courses_dir, followed by "/*/html".
  +
<Directory /opt/webwork/courses/*/html>
  +
Options FollowSymLinks
  +
</Directory>
  +
<Directory /Users/gage/webwork/courses/*/html>
  +
Options FollowSymLinks
  +
</Directory>
  +
PerlModule WebworkSOAP
  +
  +
#WEBWORK SOAP CONFIGURATION
  +
<Location /webwork2_rpc>
  +
PerlHandler Apache2::SOAP
  +
SetHandler perl-script
  +
PerlSetVar dispatch_to "WebworkSOAP"
  +
PerlSetVar options "compress_threshold => 10000"
  +
Order Allow,Deny
  +
Allow from All
  +
</Location>
  +
  +
#WEBWORK SOAP WSDL HANDLER :: TO BE REPLACED WITH A FILE FOR PRODUCTION SERVERS
  +
<Location /webwork2_wsdl>
  +
PerlSetVar dispatch_to "WebworkSOAP::WSDL"
  +
PerlSetVar options "compress_threshold => 10000"
  +
PerlHandler WebworkSOAP::WSDL
  +
SetHandler perl-script
  +
Order Allow,Deny
  +
Allow from All
  +
</Location>
  +
  +
  +
  +
</pre>
  +
notice that because of the bug that existed (exists?) in
  +
mod_perl2 we are specifying the stanzas directly rather than
  +
using the Perl evaluation. Since there are few variables
  +
that need customizing in this section this is not much of
  +
an imposition.
  +
  +
  +
(2b) Finally you must modify one line at the top of the file:
   
 
<code>webwork2/lib/WebworkSOAP/WSDL.pm</code>
 
<code>webwork2/lib/WebworkSOAP/WSDL.pm</code>
Line 106: Line 250:
 
(note the agreement with the stanzas in the <code>webwork.apache-config</code> file.
 
(note the agreement with the stanzas in the <code>webwork.apache-config</code> file.
   
and modify one line at the top of the file:
+
(2c) and modify one line at the top of the file:
   
 
<code>webwork2/lib/WebworkSOAP.pm</code> to contain your secret code:
 
<code>webwork2/lib/WebworkSOAP.pm</code> to contain your secret code:
Line 112: Line 256:
 
<code>WebworkSOAP.pm:$WebworkSOAP::SeedCE{soap_authen_key} = "YourSecretCodeHere";</code>
 
<code>WebworkSOAP.pm:$WebworkSOAP::SeedCE{soap_authen_key} = "YourSecretCodeHere";</code>
   
Reboot the webwork server.
+
(3) Reboot the webwork server.
  +
  +
(4) Some checks:
  +
  +
* Try the url <code>http ://host.name.edu/webwork2_wsdl</code>
  +
  +
This is a simple check and it should return a (complicated) wsdl file.
  +
  +
<code>http ://host.name.edu/webwork2_rpc</code> returns a blank page but does not create an error on my machine.
  +
YMMV. There are reports that in some cases this test returns an error because of a missing perl file even though the webwork2_rpc connection is ok.
  +
** ''The other problems that I had were with broken Perl modules. I don't remember all the details, but I think that if the webwork2_rpc test fails (even though things are actually working) this triggers an attempt to produce an error report that breaks one of the perl modules (SOAP?) because of an undefined constant. ''
  +
** On our installations Fedora and CentOS, we needed to install the Perl modules Pod::WSDL (via CPAN) and Apache2::SOAP (using yum to install package perl-Apache2-SOAP) for this test to work. Also on Fedora, we had to disable the Apache2 mod_security module, in order to fix the "Communication error between the Moodle client and WeBWorK server" problem.
  +
* If moodle is returning the error "Communication error between the Moodle client and WeBWorK server." double check that the
  +
address in the WSDL.pm file is correct (and remember to reboot the server). Check the apache error log for more detailed error messages.
   
 
== Adding a WeBWorK Problem Set to a course ==
 
== Adding a WeBWorK Problem Set to a course ==
Line 118: Line 262:
 
* Choose a Moodle course and select "turn editing on".
 
* Choose a Moodle course and select "turn editing on".
   
* Add a block called WeBWorK Link (see Moodle instructions for creating blocks if needed)
+
* Add a block called WeBWorK Link. Only users with Moodle administration privileges will be able to create and edit WWLink blocks. This prevents instructors from connecting their moodle course to a randomly selected webwork course. (see Moodle instructions for creating blocks if needed)
  +
  +
* The block will read "Not Connected to WeBWorK". Edit the block and from the drop-down menu select the WeBWorK course that you wish to be associated with this Moodle course. This WeBWorK course and its homework assignments should already have been set up on the WeBWorK server site. The assignments should be "visible" and be "open" i.e. available to students, otherwise the results may be unpredictable. Save changes.
  +
  +
* Now from "add an activity" select "WeBWorK Problem Set". You will need to fill in the moodle name for the activity and select a corresponding webwork problem set from the drop-down menu. (The menu lists all homework sets currently created in the WeBWorK course.) The other information is related to the moodle activity. (The ID number, available in Moodle 1.9 is for convenience in using the gradebook.)
  +
  +
* You can continue adding new WeBWorK Problem Set activities to the course in the appropriate weeks. You can also edit previous WeBWorK Problem Set activities and reassign them to a different problem set, although this might cause grading anomalies if some students have already started the assignment.
  +
  +
* Notice that unlike earlier versions of wwassignment nothing special needs to be done to the WeBWorK course. Any WeBWorK courses on the server can be linked to from Moodle.
  +
  +
== Limitations ==
  +
  +
* Grades are updated from the WeBWorK database to the moodle gradebook using a "cron job" timer. This means that the gradebook is updated every hour or so as long as your Moodle installation is running a cron job. (Moodle will inform the systems administator if the cron jobs are not running.)
  +
Also if you "edit" or "update" a moodle wwassignment this will force all of the WeBWorK data for that assignment to be updated in the Moodle gradebook. You don't actually have to change anything on the "update" page -- the grades will be added once you click the "save" or "save and return" button on the update page.
  +
  +
* WARNING: Changing the WW Link association of the Moodle course and a corresponding WeBWorK course may have unpredictable results. (If the assignments in the new course correspond it might work. )
  +
  +
* WARNING: The connection between WeBWorK is not (yet) very robust. If you delete a homework set in WeBWorK it has no-way of informing the Moodle activities linked to it and strange behavior may result. You will manually have to delete the moodle assignment. Changing the problems in the homework set will not affect the link -- but may produce unusual results in grading if some students have already done the homework set. (This also applies to using WeBWorK on its own.)
  +
  +
* Modifications of the due date for the homework set are communicated to some parts of Moodle (e.g. the listing of all WeBWorK Problem Sets) but not immediately to all -- for example the calendar page is not updated until the next time moodle's cron job runs.
  +
  +
* Modifications of the due date for individuals are not transmitted to Moodle at all -- the dates on the calendar and in the list of WeBWorK Set Problems will be incorrect for this student -- but the homework sets will work as intended once the student visits the WeBWorK course.
  +
  +
* New students in a Moodle course automatically have WeBWorK homework sets created for them the first time they click on that Moodle WeBWorK Problem Set assignment. They can revisit the WeBWorK Problem Set to complete questions anytime before the due date for the homework set. However when students drop the course or are deleted, their corresponding assignments are not automatically deleted from WeBWorK.
  +
  +
* Unenrolling a student from Moodle will not "drop" the student from the corresponding WeBWorK course. (It's possible the new event mechanism in Moodle will allow this feature to be implemented.) One can drop the student in WeBWorK using the WeBWorK tools.
  +
  +
* WARNING: Any instructor in a Moodle course with the "secret code" of the WeBWorK server can link to any WeBWorK course on the server, thereby installing themselves as an instructor in that WeBWorK course. UPDATE(9/20/2009) Thanks to Zig Fiedorowicz a patch has been added to block_wwlink which checks that the user has site administrator privileges before they are are allowed to edit the wwlink block. A non-administrator who turns editing on will see the message: "Sorry, but you do not currently have permissions to do that...". An administrator acting as a teacher will not however see the warning message -- only real teachers and course creators will see it.
  +
  +
* Using "gateway quizzes" with Moodle is problematic. In contrast to the homework mode nothing has been specifically developed to integrate gateway quizzes with Moodle. ''If I set up a WeBWork assignment as a proctored quiz, the wwassignment link doesn't seem to like it. It's not a huge problem, because students can navigate to the quiz directly and or use the link that comes up with the error to take the quiz.''
  +
  +
* See also [[Instructor_tips_for_Moodle-WW_Assignment_module]] for further advice on working around WWassignments quirks.
   
 
== Credits ==
 
== Credits ==
   
The original <code>wwmoodle</code> package was developed by Peter Snoblin at the Truman State University in Missouri to work with WeBWorK 1 (which used CGI technology). http://www2.truman.edu/~pas577/wwmoodle/ It was further developed promoted within the Moodle community by Prof. Zbigniew Fiedorowicz of Ohio State University
 
   
The WeBWorK parts were integrated into the official source for WeBWorK2 by Main.SamHathaway. The Moodle parts (<code>wwmoodle</code> and <code>wwmoodleset</code>) were refactored into the original <code>wwassignment</code> module by Main.MichaelGage.
 
  +
[[User:Zbigniew_Fiedorowicz | Zbigniew Fiedorowicz]] and Steve Zeidner of Ohio State University first developed an implementation of a bridge between WeBWorK 1.9 (which used old CGI technology) and Moodle in spring of 2003. The bridge was implemented by using a man-in-the-middle server script to interpolate between Moodle and WeBWorK. This bridge was used extensively in most first year calculus courses at Ohio State during the period 2003-2009, serving almost 20000 students total. (It is being replaced by wwassignment4 as of Autumn, 2009.)
<code>wwassignment3</code> was written by Main.MattLeventy and modified by Main.MichaelGage to create <code>wwassignment4</code>
 
  +
  +
In late 2005 the <code>wwmoodle</code> package was [http://moodle.org/mod/forum/discuss.php?d=34765 publicly released] by Peter Snoblin at the Truman State University in Missouri to work with WeBWorK2 by sharing information within the mySQL database.
  +
  +
The WeBWorK parts were integrated into the official source for WeBWorK2 by [[:User:Sam | Sam Hathaway]]. The Moodle parts (<code>wwmoodle</code> and <code>wwmoodleset</code>) were refactored into the original <code>wwassignment</code> module by [[:User:Gage | Michael Gage]] who also kept wwassignment current with changes in the Moodle and WeBWorK database structures.
  +
  +
<code>wwassignment3</code> was written by [[User:Mleventi | Matt Leventy]] in 2007 and modified by [[:User:Gage | Michael Gage]] to create <code>wwassignment4</code>. This included creating the WebworkSOAP.pm SOAP interface now used to by WeBWorK to respond to Moodle's requests. In this current (<code>wwassignment4</code> implementation between WeBWorK rel-2-4-7 and Moodle 1.9.5+ WeBWorK does not initiate any communication.
   
  +
The update that allows these modules to work with Moodle 2.0
  +
were done by Jonathan Duncan, Professor of Mathematics at Walla Walla University.
  +
http://math.wallawalla.edu/~duncjo/
   
== Historical ==
+
= Historical =
 
=== Requirements (wwassignment and wwassignment2)===
 
=== Requirements (wwassignment and wwassignment2)===
   
Line 251: Line 402:
 
You will be able to log into the admin course using the credentials of any Moodle administrator. If you would like to grant access to non-administrators, make them teachers in the Moodle <code>admin</code> course.
 
You will be able to log into the admin course using the credentials of any Moodle administrator. If you would like to grant access to non-administrators, make them teachers in the Moodle <code>admin</code> course.
   
=== Limitations ===
+
=== Historical Limitations ===
  +
  +
These former limitations are no longer a problem.
   
 
==== Course naming ====
 
==== Course naming ====
  +
  +
''(this is no longer valid)''
   
 
The name of the WeBWorK course that is associated with a given Moodle course is fixed. The system takes the short name of the Moodle course and removes any non-alphanumeric characters. This value is then stored. If you have two Moodle courses with identical short names (modulo non-alphanumeric characters), they will be associated with the same WeBWorK course. The behavior in this case is not defined.
 
The name of the WeBWorK course that is associated with a given Moodle course is fixed. The system takes the short name of the Moodle course and removes any non-alphanumeric characters. This value is then stored. If you have two Moodle courses with identical short names (modulo non-alphanumeric characters), they will be associated with the same WeBWorK course. The behavior in this case is not defined.
Line 261: Line 414:
 
==== Set assignment ====
 
==== Set assignment ====
   
In Moodle, activities are always assigned to all participants in a course. However, you still have to assign WeBWorK homework sets to students using the WeBWorK instructor tools -- this is not done automatically.
 
  +
''(This is no longer valid)''
   
  +
In Moodle, activities are always assigned to all participants in a course. However, you still have to assign WeBWorK homework sets to students using the WeBWorK instructor tools -- this is not done automatically.
   
[[Category:Moodle_Assignment]]
+
[[Category:Administrators]]
  +
[[Category:Authentication]]
  +
[[Category:Moodle_Integration]]

Latest revision as of 11:07, 25 August 2023

Outdated IMPORTANT: The content of this page is outdated. Do not rely on the information contained in this page.

Warning : The Moodle Assignment Tool is no longer well supported, and may not work with current or future versions of WeBWorK or Moodle. Moving forward integration with any Learning Management System (including Moodle) should use LTI.

LTI

Since the Moodle Assignment module is no longer being maintained, integration with Moodle should be done via LTI. Use the information below at your own risk.

WWassignment

wwassignment is a Moodle module which defines a new activity that links to a WeBWorK problem set in any WeBWorK installation 2.4 or later. The assignment allows single sign-on (moodle users who select the WeBWorK assignment are automatically logged into WeBWorK) and the grades from the homework assignment are automatically transferred back to the Moodle gradebook.


There is more than one "bridge" between Moodle and WeBWorK. For an overview see Moodle_Integration


History

The current version of this plugin, wwassignment5 will work with moodle2.x. For Moodle1.9.x, use the wwassignment4 module below.

wwassignment4 will work with moodle1.9.x (wwassignment3 which will work with moodle 1.8.x is available but no longer supported.)

The current version wwassignment5 can be downloaded using the command

svn co http://svn.webwork.maa.org/system/trunk/wwmoodle/wwassignment5/.  

wwassignment5 is a client/server webservice application. Moodle acts as the client and any webwork installation 2.4 or later can be configured to act as a server. Moodle and WeBWorK do not have to be on the same server or in the same domain.

wwassignment 5 (for use with Moodle 2.x)

Requirements

  • WeBWorK 2.4.5 or later
  • Moodle 2.x
  • MySQL 5.x or later (it might also work with MySQL 4.x but it has not been tested.)

This version of the assignment level bridge between moodle and webwork works for Moodle 2.+ (not 2.4) and WeBWorK 2.4.+ or WeBWorK 2.5+.

The update that allows these modules to work with Moodle 2.0 were done by Jonathan Duncan, Professor of Mathematics at Walla Walla University. http://math.wallawalla.edu/~duncjo/

Download and Install ( wwassignment5)

If you are updating to wwassignment5 from an earlier version of wwassignment it is safest to 
delete the wwassignment module using moodle's admin functions. You will need admin privileges in 
moodle. On the admin page to the menu: modules->activities->'manage activities' and 
delete the wwassignment module. Then remove the wwlink directory:  moodle/blocks/wwlink
and the wwassigment directory: moodle/mod/wwassignment.  They will be replaced by the new directories
obtained via svn.

Check out the wwassignment5 module from the WeBWorKSVN repository into your private directory.


svn co http://svn.webwork.maa.org/system/trunk/wwmoodle/wwassignment5


To install

  1. move the wwlink directory, currently in the blocks subdirectory,into the moodle/blocks directory
  2. move the wwassignment directory, currently in the mod subdirectory, into the moodle/mod directory. There is no need to run a script -- simply placing these objects into the correct moodle directories will be enough.
  3. After that a moodle administrator will need to login from the web in order to activate the new module and set up the preferences so that it points to a local webwork server. (Click on the "notifications" link if moodle does not immediately bring you to a configuration page).
  4. The configuration of the WeBWorK server is identical to the configuration of wwassignment4 as described below. If you have been using earlier versions of wwassignment, no changes will need to be made to the webwork server configuration.

wwassignment 4 (for use with Moodle 1.9.5+)

Requirements

  • WeBWorK 2.4.5 or later
  • Moodle 1.9.x
  • MySQL 5.x or later (it might also work with MySQL 4.x but it has not been tested.)

Download and Install ( wwassignment4)

If you are updating to wwassignment4 from an earlier version of wwassignment it is safest to 
delete the wwassignment module using moodle's admin functions. You will need admin privileges in 
moodle. On the admin page to the menu: modules->activities->'manage activities' and 
delete the wwassignment module.

Check out the wwmoodle module from the WeBWorKSVN repository:


svn co http://svn.webwork.maa.org/system/trunk/wwmoodle/wwassignment4

This will create a wwassignment4 directory in the current directory containing subdirectories .

To update this directory from the repository simply type svn update in the wwassignment4 directory


Next, run the commands

 cd wwassignment4/bin/setup
 perl setup.pl


and follow instructions to create the directory wwassignment in moodle's mod directory. You will need to know the path to the wwmoodle directory and the path to the base of the moodle directory. I usually copy files rather than link to them when asked to choose although that is not essential.

The following directories are installed in your moodle software collection

blocks/wwlink  -- provides the "block" that allows you to choose which WW course is connected to the moodle course
mod/wwassignment  -- the main body of code for implementing the wwassignment module

Configuration

Applies to wwassignment5 and wwassignment4


(1) Open Moodle and select "Notification" (you will need administrative privileges on Moodle to do this). After the Moodle database updates have completed, return to the main page and select Modules->Activities->WeBWorK Problem Set to configure the Moodle side of the Moodle-WeBWorK interface:

wwassignment_webworkurl: url of webwork course: http://host.name.edu/webwork2

wwassignment_iframewidth: 95%

wwassignment_iframeheight: 500px

wwassignment_rpc_wsdl: url of wsdl file http://host.name.edu/webwork2_wsdl

wwassignment_rpc_key: YourSecretCodeHere This must match the code defined in the WeBWorK installation (see below).

(2)In the WeBWorK installation (with url: http://host.name.edu/webwork2 ) you must make these modifications.

(2a) In the file webwork2/conf/webwork.apache-config uncomment the lines for the SOAP installation in the final stanzas (or add them if they are missing all together).

$ENV{WEBWORK_ROOT} = $webwork_dir;

$PerlConfig .= <<EOF;


########## SOAP installation ##########
# 

# uncomment these three stanzas to use WeBWorK with Moodle

# PerlModule WebworkSOAP

# #WEBWORK SOAP CONFIGURATION
# <Location /webwork2_rpc>
#         PerlHandler Apache::SOAP
#         SetHandler perl-script
#         PerlSetVar dispatch_to "WebworkSOAP"
#         PerlSetVar options "compress_threshold => 10000"
#         Order Allow,Deny
#         Allow from All
# </Location>

# #WEBWORK SOAP WSDL HANDLER :: TO BE REPLACED WITH A FILE FOR PRODUCTION SERVERS
# <Location /webwork2_wsdl>
#         PerlSetVar dispatch_to "WebworkSOAP::WSDL"
#         PerlSetVar options "compress_threshold => 10000"
#         PerlHandler WebworkSOAP::WSDL
#         SetHandler perl-script
#         Order Allow,Deny
#         Allow from All
# </Location>

# end of WeBWorK -- Moodle stanzas

EOF

</Perl>

For installation on systems running Apache2 the webwork.apache-config file needs to be configured somewhat differently.

Here are excerpts


...

# Customize the variable $webwork_dir below to match the location of your
# WeBWorK installation.
#
# ATTENTION APACHE 2.2 USERS: There is a bug in mod_perl 2.0.2 that prevents the
# FollowSymlinksOption from working when specified
# in a <Perl> section. See below for workaround.

# Uncomment the ScriptAliasMatch to allow access to show-source.cgi
# This allows the "show source" button to work for demonstration "courses"
# See for example Davide Cervone's Knoxville lectures on math objects

ScriptAliasMatch /webwork2_course_files/([^/]*)/show-source.cgi/(.*) /opt/webwork/courses/$1/html/show-source.cgi/$2



PerlModule mod_perl2

<Perl>

# Set this variable to the path to your WeBWorK installation.

....
....
....

</Perl>


# APACHE 2.2 USERS: uncomment the following lines and customize the paths.
# The path for this block should be $webwork_htdocs_dir.
<Directory /opt/webwork/webwork2/htdocs>
 Options FollowSymLinks
</Directory>
# The path for this block should be $webwork_courses_dir, followed by "/*/html".
<Directory /opt/webwork/courses/*/html>
 Options FollowSymLinks
</Directory>
<Directory /Users/gage/webwork/courses/*/html>
 Options FollowSymLinks
</Directory>
 PerlModule WebworkSOAP

 #WEBWORK SOAP CONFIGURATION
 <Location /webwork2_rpc>
 PerlHandler Apache2::SOAP
 SetHandler perl-script
 PerlSetVar dispatch_to "WebworkSOAP"
 PerlSetVar options "compress_threshold => 10000"
 Order Allow,Deny
 Allow from All
 </Location>

 #WEBWORK SOAP WSDL HANDLER :: TO BE REPLACED WITH A FILE FOR PRODUCTION SERVERS
 <Location /webwork2_wsdl>
 PerlSetVar dispatch_to "WebworkSOAP::WSDL"
 PerlSetVar options "compress_threshold => 10000"
 PerlHandler WebworkSOAP::WSDL
 SetHandler perl-script
 Order Allow,Deny
 Allow from All
 </Location>



notice that because of the bug that existed (exists?) in mod_perl2 we are specifying the stanzas directly rather than using the Perl evaluation. Since there are few variables that need customizing in this section this is not much of an imposition.


(2b) Finally you must modify one line at the top of the file:

webwork2/lib/WebworkSOAP/WSDL.pm

to include the full domain name of the host of the WeBWorK installation.

use constant RPC_URL => 'http://host.name.edu/webwork2_rpc';

(note the agreement with the stanzas in the webwork.apache-config file.

(2c) and modify one line at the top of the file:

webwork2/lib/WebworkSOAP.pm to contain your secret code:

WebworkSOAP.pm:$WebworkSOAP::SeedCE{soap_authen_key} = "YourSecretCodeHere";

(3) Reboot the webwork server.

(4) Some checks:

  • Try the url http ://host.name.edu/webwork2_wsdl

This is a simple check and it should return a (complicated) wsdl file.

http ://host.name.edu/webwork2_rpc returns a blank page but does not create an error on my machine. YMMV. There are reports that in some cases this test returns an error because of a missing perl file even though the webwork2_rpc connection is ok.

    • The other problems that I had were with broken Perl modules. I don't remember all the details, but I think that if the webwork2_rpc test fails (even though things are actually working) this triggers an attempt to produce an error report that breaks one of the perl modules (SOAP?) because of an undefined constant.
    • On our installations Fedora and CentOS, we needed to install the Perl modules Pod::WSDL (via CPAN) and Apache2::SOAP (using yum to install package perl-Apache2-SOAP) for this test to work. Also on Fedora, we had to disable the Apache2 mod_security module, in order to fix the "Communication error between the Moodle client and WeBWorK server" problem.
  • If moodle is returning the error "Communication error between the Moodle client and WeBWorK server." double check that the

address in the WSDL.pm file is correct (and remember to reboot the server). Check the apache error log for more detailed error messages.

Adding a WeBWorK Problem Set to a course

  • Choose a Moodle course and select "turn editing on".
  • Add a block called WeBWorK Link. Only users with Moodle administration privileges will be able to create and edit WWLink blocks. This prevents instructors from connecting their moodle course to a randomly selected webwork course. (see Moodle instructions for creating blocks if needed)
  • The block will read "Not Connected to WeBWorK". Edit the block and from the drop-down menu select the WeBWorK course that you wish to be associated with this Moodle course. This WeBWorK course and its homework assignments should already have been set up on the WeBWorK server site. The assignments should be "visible" and be "open" i.e. available to students, otherwise the results may be unpredictable. Save changes.
  • Now from "add an activity" select "WeBWorK Problem Set". You will need to fill in the moodle name for the activity and select a corresponding webwork problem set from the drop-down menu. (The menu lists all homework sets currently created in the WeBWorK course.) The other information is related to the moodle activity. (The ID number, available in Moodle 1.9 is for convenience in using the gradebook.)
  • You can continue adding new WeBWorK Problem Set activities to the course in the appropriate weeks. You can also edit previous WeBWorK Problem Set activities and reassign them to a different problem set, although this might cause grading anomalies if some students have already started the assignment.
  • Notice that unlike earlier versions of wwassignment nothing special needs to be done to the WeBWorK course. Any WeBWorK courses on the server can be linked to from Moodle.

Limitations

  • Grades are updated from the WeBWorK database to the moodle gradebook using a "cron job" timer. This means that the gradebook is updated every hour or so as long as your Moodle installation is running a cron job. (Moodle will inform the systems administator if the cron jobs are not running.)

Also if you "edit" or "update" a moodle wwassignment this will force all of the WeBWorK data for that assignment to be updated in the Moodle gradebook. You don't actually have to change anything on the "update" page -- the grades will be added once you click the "save" or "save and return" button on the update page.

  • WARNING: Changing the WW Link association of the Moodle course and a corresponding WeBWorK course may have unpredictable results. (If the assignments in the new course correspond it might work. )
  • WARNING: The connection between WeBWorK is not (yet) very robust. If you delete a homework set in WeBWorK it has no-way of informing the Moodle activities linked to it and strange behavior may result. You will manually have to delete the moodle assignment. Changing the problems in the homework set will not affect the link -- but may produce unusual results in grading if some students have already done the homework set. (This also applies to using WeBWorK on its own.)
  • Modifications of the due date for the homework set are communicated to some parts of Moodle (e.g. the listing of all WeBWorK Problem Sets) but not immediately to all -- for example the calendar page is not updated until the next time moodle's cron job runs.
  • Modifications of the due date for individuals are not transmitted to Moodle at all -- the dates on the calendar and in the list of WeBWorK Set Problems will be incorrect for this student -- but the homework sets will work as intended once the student visits the WeBWorK course.
  • New students in a Moodle course automatically have WeBWorK homework sets created for them the first time they click on that Moodle WeBWorK Problem Set assignment. They can revisit the WeBWorK Problem Set to complete questions anytime before the due date for the homework set. However when students drop the course or are deleted, their corresponding assignments are not automatically deleted from WeBWorK.
  • Unenrolling a student from Moodle will not "drop" the student from the corresponding WeBWorK course. (It's possible the new event mechanism in Moodle will allow this feature to be implemented.) One can drop the student in WeBWorK using the WeBWorK tools.
  • WARNING: Any instructor in a Moodle course with the "secret code" of the WeBWorK server can link to any WeBWorK course on the server, thereby installing themselves as an instructor in that WeBWorK course. UPDATE(9/20/2009) Thanks to Zig Fiedorowicz a patch has been added to block_wwlink which checks that the user has site administrator privileges before they are are allowed to edit the wwlink block. A non-administrator who turns editing on will see the message: "Sorry, but you do not currently have permissions to do that...". An administrator acting as a teacher will not however see the warning message -- only real teachers and course creators will see it.
  • Using "gateway quizzes" with Moodle is problematic. In contrast to the homework mode nothing has been specifically developed to integrate gateway quizzes with Moodle. If I set up a WeBWork assignment as a proctored quiz, the wwassignment link doesn't seem to like it. It's not a huge problem, because students can navigate to the quiz directly and or use the link that comes up with the error to take the quiz.

Credits

Zbigniew Fiedorowicz and Steve Zeidner of Ohio State University first developed an implementation of a bridge between WeBWorK 1.9 (which used old CGI technology) and Moodle in spring of 2003. The bridge was implemented by using a man-in-the-middle server script to interpolate between Moodle and WeBWorK. This bridge was used extensively in most first year calculus courses at Ohio State during the period 2003-2009, serving almost 20000 students total. (It is being replaced by wwassignment4 as of Autumn, 2009.)

In late 2005 the wwmoodle package was publicly released by Peter Snoblin at the Truman State University in Missouri to work with WeBWorK2 by sharing information within the mySQL database.

The WeBWorK parts were integrated into the official source for WeBWorK2 by Sam Hathaway. The Moodle parts (wwmoodle and wwmoodleset) were refactored into the original wwassignment module by Michael Gage who also kept wwassignment current with changes in the Moodle and WeBWorK database structures.

wwassignment3 was written by Matt Leventy in 2007 and modified by Michael Gage to create wwassignment4. This included creating the WebworkSOAP.pm SOAP interface now used to by WeBWorK to respond to Moodle's requests. In this current (wwassignment4 implementation between WeBWorK rel-2-4-7 and Moodle 1.9.5+ WeBWorK does not initiate any communication.

The update that allows these modules to work with Moodle 2.0 were done by Jonathan Duncan, Professor of Mathematics at Walla Walla University. http://math.wallawalla.edu/~duncjo/

Historical

Requirements (wwassignment and wwassignment2)

These are no longer maintained and are not recommended unless you absolutely must use an early version of moodle. WeBWorK 2.3.x. or later.

Moodle 1.5.x, 1.6.x, or 1.7.x. We tested with version 2005060231 a.k.a. 1.5.3+, and later with some varieties of 1.7.

MySQL 4.1 or later.

The PHP::Serialization Perl module. Available from CPAN.

WeBWorK and Moodle must use the same MySQL server. The account that Moodle uses to log into its database must have SELECT access on the WeBWorK database and the account the WeBWorK uses to log into its database must have SELECT access on the Moodle database.

Moodle must also be able to read the WeBWorK courses directory. This can be a local directory, or it could be some kind of network mount, i.e. NFS. Moodle does not need to write to this directory.

Moodle and WeBWorK need have the same hostname. This is because the client's browser will only send the Moodle cookie to WeBWorK if the hostname matches. (The two applications can be set up on different ports though, so if you absolutely need them on different servers you could set up some kind of router-based port-forwarding. This is also useful if you need to run Moodle on Apache1 and WeBWorK on Apache2.)

(We plan to eliminate the same-server requirements in a future version.)

Installation

First, make sure that Moodle is set up to store session data in the database. Log in to Moodle as an administrator and select the "Configuration" option. Scroll down to the "Operating System" section and set the "dbsession" option to "Yes".

Check out the wwmoodle module from the WeBWorKCVS repository:

cvs -d :pserver:anoncvs@cvs.webwork.rochester.edu:/webwork/cvs/system co -D 2006-07-01 wwmoodle

(Only the versions of wwassignment written by Gage prior to July 1 of 2006 correspond to the description here. Later versions written by Leventi and wwassignment2 progress toward the creation of wwassignment3. )

This will create a wwmoodle directory in the current directory. Move the wwassignment subdirectory to your Moodle mod directory.

cd wwmoodle
mv wwassignment /path/to/moodle/mod
cd /path/to/moodle

Create symlinks to the language files in the proper locations.

cd /path/to/moodle/lang/en
ln -s ../../mod/wwassignment/lang.php wwassignment.php
cd help
ln -s ../../../mod/wwassignment/help wwassignment

If you're using the utf8 encoding, move the files into the en_utf8 directory instead of the en directory. (Or do both.)

The advantage of symlinking is that a cvs up from the wwassignment directory will be able to update the language files. Some people have reported problems when symlinking. If this is your experience, just move the files instead:

cd /path/to/moodle/lang/en
mv ../../mod/wwassignment/lang.php wwassignment.php
cd help
mv ../../../mod/wwassignment/help wwassignment

Log in to Moodle as an administrator and select the "Admin..." option. At this point, Moodle will set up the wwassignment module.

Then, select the "Configuration" option and then the "Modules" option. Click the "Settings" link next to "WeBWorK Problem Set" to configure the module.

Option Description
wwassignment_webworkcourses This is the path to the WeBWorK courses directory. It should be set to the same value as the $webwork_courses_dir variable in global.conf, except that in this case it needs to end with a slash.
wwassignment_webworkurl The URL where WeBWorK is accessible. By default, this is /webwork2. If WeBWorK is on a different port, you'll need the full URL. This should be the same value as $webwork_url in global.conf. It does not need a trailing slash.
wwassignment_iframewidth Width of frame in which WeBWorK problem sets are embedded.
wwassignment_iframeheight Height of frame in which WeBWorK problem sets are embedded.

There are a few settings that need to be made in global.conf as well:

Option Description
$moodle_dsn The DSN for the moodle database. Default: "dbi:mysql:moodle". Corresponds to dbtype, dbhost, and dbname in Moodle's config.php.
$moodle_table_prefix The prefix to prepend to Moodle table names. Default: "mdl". Corresponds to prefix in Moodle's config.php.
$moodle_username The username to use when connecting to the Moodle database. Default: same as WeBWorK database username. Corresponds to dbuser in Moodle's config.php.
$moodle_password The password to use when connecting to the Moodle database. Default: same as WeBWorK database password. Corresponds to dbpass in Moodle's config.php.

Usage

Once you've set this up, you should notice a new WeBWorK Problem Set activity in the list of activities you can add to your course. The form for creating WeBWorK problem sets includes two interesting links.

The first is Create the WeBWorK course. This links you to the WeBWorK Course Administration page, with the name of the course pre-filled and the sql_moodle database layout preselected. This link shows up whether or not the course has already been created, so you may get an error is the course already exists.

The second is Administer the WeBWorK portion of this course. This links you to the WeBWorK Instructor Tools page, where you can configure problem sets. You can also view, but not edit, the User List.

WeBWorK theme for Moodle

The moodle WeBWorK theme is a modified version of the default math theme. It detects when WeBWorK is called from within a Moodle frame, and removes superfluous interface elements. It also expands the Moodle frame so that it doesn't have to scroll.

Set the theme by changing the value of $defaultTheme in global.conf (for all courses) or a specific course's course.conf (for just that course). This value can also be set for a particular course using the Course Configuration page.

Moodle authentication rules

Moodle administrators are allowed to log into any WeBWorK sql_moodle course. They are assigned permission level 10.

Moodle teachers are allowed to log into only their corresponding WeBWorK sql_moodle course. They also get permission level 10.

Moodle students are allowed to log into only their corresponding WeBWorK sql_moodle course. They get permission level =0=.

Moodle groups are mapped to WeBWorK recitations, unless the group begins with SEC_, in which case, it is mapped to a WeBWorK section (with the SEC_ prefix is removed).

sql_moodle admin course

The WeBWorK course administration system can be configured to authenticate against a Moodle course.

First, create a Moodle course with the short name admin. This course doesn't need to have any participants or any content.

If you haven't created your WeBWorK admin course yet, select the sql_moodle database layout when you do.

If you've already created your WeBWorK admin course, edit its course.conf file to change the $dbLayoutName to sql_moodle.

You will be able to log into the admin course using the credentials of any Moodle administrator. If you would like to grant access to non-administrators, make them teachers in the Moodle admin course.

Historical Limitations

These former limitations are no longer a problem.

Course naming

(this is no longer valid)

The name of the WeBWorK course that is associated with a given Moodle course is fixed. The system takes the short name of the Moodle course and removes any non-alphanumeric characters. This value is then stored. If you have two Moodle courses with identical short names (modulo non-alphanumeric characters), they will be associated with the same WeBWorK course. The behavior in this case is not defined.

We intend to make the name of the linked WeBWorK course configurable, and prevent two Moodle courses from being associated with the same WeBWorK course.

Set assignment

(This is no longer valid)

In Moodle, activities are always assigned to all participants in a course. However, you still have to assign WeBWorK homework sets to students using the WeBWorK instructor tools -- this is not done automatically.