Open Problem Library

From WeBWorK_wiki
Jump to navigation Jump to search


Warning : The National Problem Library (NPL) has been renamed to the WeBWorK Open Problem Library (OPL for short) to reflect that it will soon contain content from many countries and in many languages. Until we get all of the instructions cleaned up these instructions may not work quite as advertised.


The WeBWorK Open Problem Library (OPL) contains problems contributed by faculty from many institutions that have used WeBWorK. Currently, there are approximately 25,000 problems in the OPL, and new problems are added regularly. The OPL was initially formed from several of the original File Based Problem Libraries, and includes all of the problems from the Arizona State, Rochester, California State-Long Beach, and the University of Virginia libraries. It also contains most, if not all, of the problems from Union College, the College of New Jersey, Dartmouth, Ohio State, Northern Arizona University, and Indiana University. Once known as the National Problem Library (NPL), the Open Problem Library (OPL) naming convention was adopted in the summer of 2012 to accommodate the increasing internationalization of WeBWorK and the possible inclusion of problem libraries from textbook publishers.

In addition to merging problem collections from multiple institutions into a single collection, WeBWorK provides a different interface to these problems. Problems in the OPL are marked internally with metadata, and instructors can search for problems on the basis of this data. This mechanism is built into WeBWorK's library browser. In particular, one can search hierarchically by course, chapter, or section. To a limited extent, problems have been indexed against sections of textbooks, in which case instructors can also search for problems on that basis. WeBWorK stores this information in a database, so part of the installation involves loading metadata into the database.

Faculty from institutions using WeBWorK are invited to submit new problems to the OPL. The OPL is one of the most popular features of WeBWorK, and its value is based on the many excellent contributions that have been recieved.

Obtaining the OPL

The Open Problem Library can be checked out from the WeBWorK Subversion repository via

 cd /opt/webwork/libraries
 sudo git clone https://github.com/openwebwork/webwork-open-problem-library.git.

You may or may not need to use sudo depending on the permissions assigned to the libraries directory.

Insure that the permissions are set so that the webwork server can read the files in the OpenProblemLibrary.

git is a command that is already installed on most unix systems. If not there are standard simple instructions for installing it on your platform available via google search.

Installing the OPL

This section assumes you have an otherwise working WeBWorK installation. The standard Installation instructions recommend WeBWorK be installed into /opt/webwork, and the instuctions here assume that location. In fact, if you are installing WeBWorK for the first time, we recommend that you install the OPL using those instructions, which provide more context and may be easier to follow.

Assuming the rest of WeBWorK is in /opt/webwork/ proceed as follows to install the OPL. First, make sure you have an /opt/webwork/libraries directory:

 mkdir -p /opt/webwork/libraries

The OPL can be downloaded from the OPL github.com repository directly into the library directory. It creates a directory called webwork-open-problem-library containing the library. The full path to the library will be /opt/webwork/libraries/webwork-open-problem-library/OpenProblemLibrary. This is the library address that should be included in webwork2/conf/localOverrides.conf.


cd /opt/webwork/libraries
sudo git clone https://github.com/openwebwork/webwork-open-problem-library.git.



For backwards compatibility one can create symbolic links to:

$ ln -s /opt/webwork/libraries/webwork-open-problem-library/OpenProblemLibrary /opt/webwork/libraries/NationalProblemLibrary

Alternatively one can update the Library link in each course courseName/templates/Library. This requires

more work but is a better solution in the long run.


Depending on your previous setup, you may have to create additional symbolic links from the previous locations of libraries to the current ones. In particular, the popular file libraries are now contained in the National Problem Library, so you may need links such as

$ ln -s /opt/webwork/libraries/webwork-open-problem-library/OpenProblemLibrary/Rochester /opt/webwork/libraries/rochesterLibrary

at least in the short run to keep older set definition files working.

For WeBWorK 2.6 (or ww2.5.1.1) and later

Modify configuration file and run update

Enter the path to the OpenProblemLibrary into the config file webwork2/conf/localOverrides.conf and set the library version number to 2.5


 $problemLibrary{root}        ="/opt/webwork/libraries/webwork-open-problem-library/OpenProblemLibrary";
 $problemLibrary{version}     ="2.5";


Then run webwork2/bin/OPL-update from the command line to update the meta-data for the current collection of problems in the library.

 cd /opt/webwork/webwork2/bin/
 ./OPL-update


(You will need to have defined WEBWORK_ROOT in your preferences file.)


Configuring your shell in order to run OPL-update from the command line

To make working with WeBWorK easier, there are a couple of changes you can make to your shell environment.

Add the WeBWorK bin directory to your path. This will allow you to run WeBWorK command-line utilities without typing the full path to the utility. If you installed WeBWorK in the default location of /opt/webwork/webwork2, add the directory /opt/webwork/webwork2/bin to your path.

if your shell is put this line in this file
bash export PATH=$PATH:/opt/webwork/webwork2/bin ~/.bashrc
tcsh setenv PATH $PATH:/opt/webwork/webwork2/bin ~/.cshrc

Set the WEBWORK_ROOT environment variable. Some command-line scripts rely on this variable to find other WeBWorK files.

if your shell is put this line in this file
bash export WEBWORK_ROOT=/opt/webwork/webwork2 ~/.bashrc
tcsh setenv WEBWORK_ROOT /opt/webwork/webwork2 ~/.cshrc

Versions earlier than release 2.6 (or ww2.5.1.1)

Upgrade to release 2.6. Seriously!


Release 2.6 (renamed from ww2.5.1.1) has been in wide spread use for more than a year. You should definitely consider

updating to 2.6. In particular this version contains redesigned configuration files that allow you to upgrade to subsequent

versions such as release 2.7 with few if any modifications to the configuration files. This also allows you to backtrack to earlier

versions if you feel you have upgraded prematurely. Version 2.7 supports essayQuestions among other enhancements. Both version

2.6 and 2.7 support achievements.


Legacy instructions

If you must use an earlier version of webwork here are the legacy instructions:


If you are running WeBWorK 2.3.x, you must create a ProblemLibrary database on your MySQL server. (***** represents the MySQL root password.)

$ mysql -u root
Password: *****
> CREATE DATABASE ProblemLibrary;
> GRANT SELECT on ProblemLibrary.* TO webworkWrite@localhost;
> quit
Bye.
$

If you are running WeBWorK 2.4.x, this is not necessary since the NPL indexes are stored within the main webwork database.

Configure WeBWorK to access the problem library. The settings are in global.conf:

For WeBWorK 2.3.x:

variable description
$problemLibrary{root} Path to NationalProblemLibrary directory. Should be /opt/webwork/libraries/NationalProblemLibrary.
$problemLibrary{version} Version of the problem library database. Should be =2=.
$problemLibrary{sourceSQL} Name of the database. Should be ProblemLibrary.
$problemLibrary{userSQL} Username to use when connecting to the database. Can usually be left as $database_username.
$problemLibrary{passwordSQL} Password to use when connecting to the database. Can usually be left as $database_password.

For WeBWorK 2.4.x

variable description
$problemLibrary{root} Path to NationalProblemLibrary directory. Should be /opt/webwork/libraries/NationalProblemLibrary.
$problemLibrary{version} Version of the problem library database. Should be =2=.
$problemLibrary_db{dbsource} Name of the database. Can usually be left as $database_dsn.
$problemLibrary_db{user} Username to use when connecting to the database. Can usually be left as $database_username.
$problemLibrary_db{passwd} Password to use when connecting to the database. Can usually be left as $database_password.

Finally, populate the database:

For WeBWorK 2.3.x:

Run the loadDB2 script to populate the database. This script must be run from the database_problems directory.

$ cd /opt/webwork/libraries/database_problems
$ ./loadDB2
What is the root password for mysql? *****
Mysql database reinitialized
Converting data from tagged pgfiles into mysql.
$ 

For WeBWorK 2.4.x:

Run the NPL-update script to populate the database. This script is located in the webwork2/bin directory and may be invoked from anywhere.

$ /opt/webwork/webwork2/bin/NPL-update
Mysql database reinitialized.
Reading in textbook data.
Converting data from tagged pgfiles into mysql.
Number of files processed:
   100   200   300   400   500   600   700   800   900  1000
...
Done.
$ 

There is no need to add symlinks to course templates directory, as is necessary with file based Problem Libraries. It is done automatically.

Browsing the NPL

Log into a WeBWorK course and select Library Browser from the links menu. On the resulting screen, click the National Problem Library button.

Add this stanza in the global.conf file to obtain an "NPL Directory" button which will enable you to browse the NationalProblemLibrary subdirectories.

# Additional library buttons can be added to the Library Browser (SetMaker.pm)
# by adding the libraries you want to the following line.  For each key=>value
# in the list, if a directory (or link to a directory) with name 'key' appears
# in the templates directory, then a button with name 'value' will be placed at
# the top of the problem browser.  (No button will appear if there is no
# directory or link with the given name in the templates directory.)  For
# example,
# 
#     $courseFiles{problibs} = {rochester => "Rochester", asu => "ASU"};
# 
# would add two buttons, one for the Rochester library and one for the ASU
# library, provided templates/rochester and templates/asu exists either as 
# subdirectories or links to other directories. The "NPL Directory" button
# activated below gives access to all the sub directories in the National 
# Problem Library.
# 
    $courseFiles{problibs}    = {
         Library          => "NPL Directory",
       #       rochesterLibrary => "Rochester", 
       #       asuLibrary       => "Arizona State",
       # 	dcdsLibrary      => "Detroit CDS",
       # 	dartmouthLibrary => "Dartmouth",
       # 	indianaLibrary   => "Indiana",
       # 	osuLibrary       => "Ohio State",	
       #	capaLibrary      => "CAPA",
       #	ucsbLibrary        => "UCSB"
   };

Updating the NPL

The SVN repository for the NPL is updated as problems are added, additional metadata is added, or problem bugs are fixed. So, it is a good idea to update your copy of the NPL periodically, say once per semester.

To update, run the svn update command to download the latest versions from our server. Then, re-run loadDB2 (WeBWorK 2.3.x) or NPL-update (WeBWorK 2.4.x).

$ cd /opt/webwork/libraries/NationalProblemLibrary
$ svn up
$ ./NPL-update
What is the root password for mysql? ***** (#Or the webworkWrite user, following recent installation instructions)
Mysql database reinitialized
Converting data from tagged pgfiles into mysql.
$

Contributing to the NPL

If you have written new problems, you might like to contribute them to the NPL so others can benefit from them as well.

See also